fasient1#ad - Support synchronous mainboard control and remote control of lighting effects. 8 argb ports 5v 3pin, for sata power supply, 8 fan ports 4pin PWM function, 1x3 pin lighting 5v argb motherboard synchronization, 1 motherboard temperature control port, and the remote control button is 21 keys.
Two interfaces on the left, the one on the left is the light 5V ARGB motherboard synchronous interface, if you want to use the synchronous direct connection, press the MB key on the remote control for 6 seconds to adjust the synchronization; the one on t.
The hub has a motherboard rgb synchronization function for light bars, PWM function and fan power. 1 to 8 fan multiport for sata hub power supply 12V 4pin PWM ARGB addressa. The twoinone controller is equipped with a remote control, a mainboard synchronization cable, and a control cable temperature.
If the motherboard does not support synchronization, you can use the remote control and do not need to connect the synchroniz. Four temperature control center line on the left and right sides, the light interface can be freely connected, the red temperature control interface must be connected to the temperature control fan, the for SATA interface on the right must be connected.
CERRXIAN#ad - M key: click to switch to the next lighting mode, and you can cycle to switch the controller's own lighting mode. Exquisite workmanship, small body can also play a big role, individual appearance, helping you create cool light effects. Argb 5v3-pin controller, does not need the motherboard to support 5v argb, through the built-in light mode of the controller, powered by SATA, you can directly use the power SATA interface to supply power, you can achieve lighting control for 5v 3-pin ARGB products.
Argb controller has dozens of built-in lighting modes, which can realize manual control of lighting effects, trotting light, such as monochrome, rainbow and other modes note: this controller does not support connecting the motherboard software to control the light synchronization.
C key: click to switch to other light colors in the same mode or make the light cycle in reverse, long press the C key for 5 seconds to switch the light brightness, a total of 6 levels of brightness can be cycled. Simple button design, simple operation and functional use.
At the same time, the 3-pin interface adopts the extension cable design, it solves the problem of insufficient wire length. S key: single click to switch the light conversion speed, there are 8 gears can be switched cyclically, long press the S key for 4 seconds to turn off the light, and then long press for 4 seconds to turn on the light.5v 3pin argb controller, which is convenient to connect and not easy to fall off. The 3-pin interface has a protective cover to protect the needle from bending and deformation. Standard 5v argb interface, compatible with various luminous products with standard universal 5v3 pin ARGB interface on the market, no need to worry about compatibility issues.
Akasa#ad - Ideal size for better concealment - Small design gives you the ability to conceal controller for a clean look. Powered by a 15-pin SATA connection. 3-pin connector for argb devices - compatible with 5v ARGB devices, such as case fans, led strips, air-cooled radiator, water-cooled radiator, and other Addressable RGB supported accessories.
Customise your lighting - akasa vegas controller Mate with multiple pre-set lighting modes, flashing, cross, including rainbow, cycle, and others to create a unique color world.3
3 buttons design - have total control on the look of your aRGB LEDs with the help of the 3 added buttons to change the mode, speed and colour. Superb design engineering - 40cm cable length provides flexibility for easy cable routing.
Kolink#ad - Feature-rich: the kolink inspire l2 rgb controller allows you to control multiple RGB devices, with multiple connectors to suit most RGB products.
Powerful and low cost: with support for a combined 120 LED's worth of RGB devices, the Kolink Inspire L2 RGB is an excellent low cost solution to your RGB control needs. Multiple connectors: the l2 rgb controller is sata powered, and has connectors for 12V 4-Pin RGB devices, alongside Phanteks RGB and Corsair RGB connectors too.
JZK#ad - S key: single click to switch the light conversion speed, there are 8 gears can be switched cyclically, long press the S key for 4 seconds to turn off the light, and then long press for 4 seconds to turn on the light. It does not need the support of the motherboard, and can be directly plugged into the power supply SATA interface for power supply.
M key: click to switch to the next lighting mode, and you can cycle to switch the controller's own lighting mode. Note: this controller does not support connecting motherboard software to control light synchronization. This controller can convert 5v 3-pin argb product to satA power supply controller.
The controller has dozens of built-in lighting modes, trotting light, such as monochrome, rainbow and other modes, so that hosts that do not support 5V ARGB light synchronization can also create cool light pollution. Through the built-in lighting mode of the controller, the lighting control of 5v3-pin argb products can be realized.
At the same time, it solves the problem of insufficient wire length. The 3-pin interface has a protective cover to protect the needle from bending and deformation. C key: click to switch to other light colors in the same mode or make the light cycle in reverse, long press the C key for 5 seconds to switch the light brightness, a total of 6 levels of brightness can be cycled. 5v 3pin argb controller, the 3-pin interface adopts the extension cable design, which is convenient to connect and not easy to fall off.
VOANZO#ad - This quality argb controller is suitable for controlling a wide range of 5V 3-pin ARGB lighting products and has a wide range of built-in lighting modes for manual control of lighting effects.
M key: one click to switch to the next lighting mode, you can cycle through the controller's own lighting modes. S key: single click to switch the lighting transition speed, there are 8 gears to cycle through, long press the S key for 4 seconds to turn off the light, then long press for 4 seconds to turn on the light.
Standard 5v argb interface, compatible with all kinds of light products on the market with standard universal 5v3 pin ARGB interface, helping you to create cool lighting effects.
C key: one click switches to another light colour in the same mode or reverses the light cycle, press and hold C for 5 seconds to switch the light brightness, a total of 6 levels of brightness can be cycled.
KLOP256#ad - Light effect switching- achieve manual control of lighting effects, trot lamp, you can achieve single color, rainbow and other modes. Easy to use- the argb splitter cable is easy to connect, small and easy to trace and hide in the case.
Connectable devices- can be connected to the case fan, light bar, air-cooled radiator, water-cooled radiator, lighting board, etc. Argb controller- for 3 pin 5v argb splitter cable, one connected to 5V ARGB 3 pin device, one connected to SATA power supply. Material - made of plastic, insulation and safety, more durable.
Thermalright#ad - Stable outputrgb light synchronizer is sata power direct output, top surface with Thermalrigh engraved logo, can maintain stable output, compact size, overall colour, in the state of high load, stable function. Convenient installationconfigured with strong double-sided stickers, you can fix the RGB hub to the right chassis position according to your needs, simple and safe to install according to the instructions.
High performance cable managementproduct for the rgb lighting signal hub, while supporting the installation of 10 RGB fans, each side of the five lighting interfaces, a plug available, can keep the RGB fan lighting cable line neat Note: does not support 5V 3PIN ARGB interface devices, can not be inserted.
A, colour: blue, weight: 50g, size: 90 x 46 x 16mm, Material: Plastic, easy solution to the lack of RGB light connector on the motherboard. Specificationsmodel: rgb hub controller rev. Support rgb light effectsupport rgb fan, after connecting to the motherboard, RGB light bar and other devices with light, you can achieve 3PIN 5V light interface light effect synchronization.
ARCTIC#ad - Without the software, the color spectrum runs sequentially. 4 autonomous connectors: 4 separate channels also allow additional RGB fans to be integrated into the system, synchronized or individually controlled.
Full control without rgb-enabled mainboard: The RGB controller works completely independently and allows RGB products to be controlled without the need for a motherboard. Intuitive software: the rgb controller is connected to the mainboard and controlled by ARCTIC's RGB software.
Analog 4-pin output: the rgb controller has standardized RGB 4-pin connectors, which can be used to connect and control RGB products from ARCTIC and other brands. Multiple effect selection: the controller has more than 5 pre-configured and adjustable lighting modes. This allows the system lighting to be customised to individual tastes.